Multiple distributor This passive 4/6/4 multiple distributor module consists of three groups with 2x 4 and 1x 6 jacks that are connected to each other. As a result, audio signals and control voltages can be reproduced....
Voltage controlled amplifier The VCA A from Marienberg Devices is used to control audio signals or control voltages in the level statically or dynamically. Control behaviour can be switched between exponential and...
Voltage-Controlled Envelope GeneratorComplex ADSR envelope generator with advanced functions. Each phase can be modulated with a control voltage and upon reaching each phase, a gate signal is generated and provided at...
Voltage-Controlled FilterThe Marienberg Devices' multimode filter is an analogue 12 dB filter, which provides lowpass, highpass, bandpass and band-lock filter characteristics in parallel at separate outputs. For...
Voltage-Controlled Low-Frequency OscillatorVoltage controlled LFO which produces the sinusoidal, delta, pulse, sawtooth and ramp waveforms. The waveforms can be changed via the Shape parameter. For LFO frequency, Hard...
Voltage-Controlled OscillatorHigh-precision analog oscillator with the following oscillation forms: sinus, triangle, sawtooth, rectangle and pulse. A top octave is created with the triangle, sawtooth and rectangle...
Voltage Controlled OscillatorThe VCO B is an inexpensive, small oscillator with triangle, sawtooth, ramp and pulse waveforms. For modulation, there are inputs for FM (exponential), sync and pulse width modulation. ...
Voltage-Controlled Sample & HoldAnalog sample & hold module with high-precision clocking. The classical application examples consist in the generation of a random generator or a glissando effect. Developed and...
Voltage-Controlled Sine-Phase OscillatorThe sinusoidal phase oscillator from Marienberg Devices provides the sine and pulse waveforms at eight outputs, each shifted by 45°. This results in numerous experimental...
Four-Voice MIDI ConverterWith the Marienberg Devices MIDI converter module, MIDI signals from keyboards or sequencers can be converted into analogue control voltages and gate signals. The four channels can be configured...
Precision Power SupplyHigh-end power supply for the supply of Marienberg Devices modular systems. 1000mA / + 3.3V, 1000mA / + 5V, 1300mA / + 15V, -15V / 1300mA, On / Off switch, Dimensions: 222.25 x 101.6 x 74 mm...
Active Attenuator Active attenuator for control voltages and audio signals The input voltage can be reduced from 100% to 0% Active attenuator with 3 inputs and 3 outputs, Voltage range per attenuator ± 10 V, Output...
Linear Mixer Up to five audio signals and / or control voltages can be summed with mixer A, Channels 1 to 3 are equipped with an adjustable attenuator (0-100%)., Channels 4 and 5 are always summed to 100% on the...
Connection Cable Length: 20 cm, Cable for connecting Marienberg devices modules with the Precision power supply (Article Nr 323567 - not included, must be ordered separately)
Connection Cable Length: 30 cm, Cable for connecting Marienberg devices modules with the Precision power supply (Article Nr 323567 - not included, must be ordered separately)
Connection Cable Length: 40 cm, Cable for connecting Marienberg devices modules with the Precision power supply (Article Nr 323567 - not included, must be ordered separately)
Connection Cable Length: 60 cm, Cable for connecting Marienberg devices modules with the Precision power supply (Article Nr 323567 - not included, must be ordered separately)
Connection Cable Length: 70 cm, Cable for connecting Marienberg devices modules with the Precision power supply (Article Nr 323567 - not included, must be ordered separately)
Connector Cable Length: 90 cm, Cable for connecting Marienberg Devices modules with the Precision Power Supply (available under Article Nr 323567 - not included)
Connection Cable Length: 100 cm, Cable for connecting Marienberg devices modules with the Precision power supply (Article Nr 323567 - not included, must be ordered separately)
Connection Cable Length: 110 cm, Cable for connecting Marienberg device modules with the Precision power supply (Article Nr 323567 , not included, must be ordered separately)
Connection Cable Length: 140 cm, Cable for connecting Marienberg device modules with the Precision power supply (Article Nr 323567 , not included, must be ordered separately)
Connection Cable Length: 150 cm, Cable for connecting Marienberg device modules with the Precision power supply (Article Nr 323567 , not included, must be ordered separately)
Complete Modular System 3 x Attenuator A, 4 x VC Oscillator B, 4 x multiples 4/6/4, 2 x VC Sample & Hold, 3 x VC Amplifier A, 6 x Mixer A, 4 x VC Low Frequency Oscillator A, 2 x Power Supply, 1 x MIDI to CV Converter,...
Modular SynthesizerComplete system consisting of: 2 x VC Oscillator A, 1 x VC Oscillator B, VC Multimode Filter A, VC Amplifier A, VC Envelope Generator A, 1 x VC Sample & Hold, 1x Mixer A, 1 x Precision Power...
MIDI Controller & Realtime Converter 8 Separately configurable outputs as controls or switches, The control range for control voltages (CV) can optionally be set to 10, 5, or 1 V, Output can be configured as a gate- or...
Noise Generator Module 6 Outputs with differently filtered "Oscillator Noise", White noise, Pink Noise (3 dB low pass), Red Noise (6 db low pass), Blue Noise (3 dB high pass), Violet Noise (6 dB high pass)'
Analog voltage controlled oscillator With 24 changeable, digital 8-bit waveforms, Analog linear FM, Hard Sync, Incl. a basic waveset ROM, Further wavesets available optionally
Modular System Includes an expansion attachment equipped with transformer / precision power supply, VC Sine Phase Oscillator, 2 x VC Oscillator B, 2 x Mixer, 2 x VC Multimode Filter A, 2 x VC Amplifier A, VC Low...